repacking
- Thread starter tyler1blaster
- Start date
You just take out all the old stuff in side it, its almost like rolled up guaze and replace it with new stuff.
Actually I asked my dad which he used to ride two pokes and he said it like insulation stuff that you pull out and put the new stuff in. He said though you will be lucky if you can get the screws out.
My Dad says you really shouldn't but you can. The packing in the exhaust just quiets it down and gives it backpressure.
you really only need to pack when its all burnt up.. you will notice when your packings gone..you quad will be much louder and wont have so much of the two stroke ping sound. i repack with steel wool normally it lasts longer and it does the same thing
http://www.blasterforum.com/do-yourself-20/how-re-pack-your-silencer-w-steel-wool-255/ here u go.... a diy with pics
oh and i updated that you should use the coarse stuff... (more thicker and strands)
oh and i updated that you should use the coarse stuff... (more thicker and strands)
