removing tors

yamha23

New Member
Oct 6, 2008
27
0
0
when you remove the tors do u need to do anything carb wise or just take the brain out and cut the wires and your good to go?
 
Re: question about removing tors

when you remove TORS DO U NEED TO DO ANY CARB SETTING OR IS IT AS SIMPLE AS TAKING THE BRAIN OUT AND CUTTING THE WIRES?
 
Check the DIY section it answers all I have yet to do this so I have no clue what I am talking about.
But I have read it over and checked mine out.

I believe.... BUT PLEASE CHECK THE DIY section.
1.Remove the your hood, dissconnect the clip for the brain.
2.Dissconnect the cable going from your throttle down is should also be under the hood.
3.Look at the carb overtop there is wiring comin from it. Dissconnect it as well.
*** I WOULD NOT CUT ANY WIRES SO YOU CAN RE-CONNECT****
I think thats it
other than you might have to set your carb but more then likely not or so I have heard?

if that helps cool! But please check the DIY section.
Its has tons of GREAT HELP!