porting???

[tjsdaname]

would this be good for my blaster????

trinity's
Pro MX (Motocross)
- Low-end / Mid-range combo porting

- Trinity Racing -

 

[Master_Blaster]

I would go with either Floteq porting(which I plan) or Trinity.

 

[JuniorBlaster]

it would help, do you have another carb and boot to put on it?? I would get like a 34mm and down jet it, i bought a 34mm kehien PE at a swapmeet for $10,needs a rebuild tho.

 

[tjsdaname]

yeah this winter when i send it out to get it ported i plan on getting a 34mm carb....

but i hope the porting makes a big difference

 

[JuniorBlaster]

I should without a doupt, More Air + More Fuel= More Power. The larger ports allow for more air and fuel to be mixed together. If you get the head shaved you can shove that air into a smaller combustion chamber making for a better explotion giving you more power.I:I

 

[R&S Polishing]

Porting if done right is always a good thing!! more Power= faster than your buddy

 

[FLOTEK]

the stock blaster carb will not flow enough CFM for a good race port ,id shoot for a 33 34 or 35 mm keihin