Painting the plastics on my blaster..

[MXmaineiac67]

So, i know you've gone over this about 38905032 times but, Can I get Krylon plastic paint and paint my blaster plastics black? they're white as of now, i think it would look amazing with the red frame I:I if you have black plastics on a red framed blaster, please post pics i'd love to see it

 

[fmxr47]

sand it with a fine sand paper, wash it off and do not touch with your fingers, after you paint it, apply 3 coats of wax and that thing will shine, the first 2 coats of wax will feel sticky when applying and removing, its cause the new paint is absorbing the wax, then the third coat should look good and shiney.

 

[tjsdaname]

a red frame with black plastics would look so awsome!!! get pics when your done.......if you do lol

 

[bigdblaster]

http://www.blasterforum.com/pics-vids/3413-new-pix.htmltheres my pics i could of painted them better use a good clear coat to make them shine take your time sand a good paint comes from good prep work;;which i didnt spend alot of time on because im just gonna buy new race plastic soon

 

[MXmaineiac67]

thanks for the help guys the bikes look amazing. I do have to say that inspiration comes from battbike I:I
But I plan on painting them as soon as its above 20 degrees up here in Maine.. :">

 

[rix005]

NAPA sells a plastic prep that you apply prior to paint. I forget the name of this product, but ask and they'l show you. I had a problem with paint sticking to the plastic bumper on my Freightliner truck. I applied this plastic prep before I painted it metalic silver and that was a year and a half ago and have logged 180,000 miles and is now just needing to be repainted. This stuff prepares the plastic by keeping it pliable and will keep the paint from shattering if it takes a hit or bend. hope this helps.