Oil Leak

[joel2003Blaster]

hi i have a blaster that is leaking oil out of the crank case breather vent all over my steering components the vent tube is located right in-front of the handle bars. The machines still runs 100%. does anybody know why this is happening and have u had this problem before and how did you fix it? thanks

 

[darealblaster]

Did you recently change the oil? If so, its normal, you probably put too much oil in it, and as the pressure rises, it "vents" out all the excess oil. It should stop soon,once it reaches the correct oil amount.

 

[Awk08]

if you have the correct amount of oil in it...650ml
and it's still spittin it out, you may have a blown crankseal ?
drain the oil and put the correct amount in, then report back

 

[joel2003Blaster]

okay will do and i just filled the oil injection before this started happening like the ride before. don't know if its related to this being its overflowing from the crank case?

 

[Longview]

okay will do and i just filled the oil injection before this started happening like the ride before. don't know if its related to this being its overflowing from the crank case?

No it shouldn't be related. Since the 2 cycle oil will not be in your crankcases.

 

[Triplecrown421]

hi i have a blaster that is leaking oil out of the crank case breather vent all over my steering components the vent tube is located right in-front of the handle bars. The machines still runs 100%. does anybody know why this is happening and have u had this problem before and how did you fix it? thanks

is the vent tube go to the front of the bike??? i ask because usually the vent tube it ran toward the back and the end should drop throw the frame near the rear shock. i dont understand how it could get on your steering components. could it be carbon coming out of your exhaust??? or hydraulic fluid coming out of from brake linessss????????????

 

[Awk08]

is the vent tube go to the front of the bike??? i ask because usually the vent tube it ran toward the back and the end should drop throw the frame near the rear shock. i dont understand how it could get on your steering components. could it be carbon coming out of your exhaust??? or hydraulic fluid coming out of from brake linessss????????????

the factory route for the tranny vent line is up and across behind the carb, then follows the top frame rail past the petcock to under the hood

 

[Longview]

is the vent tube go to the front of the bike??? i ask because usually the vent tube it ran toward the back and the end should drop throw the frame near the rear shock. i dont understand how it could get on your steering components. could it be carbon coming out of your exhaust??? or hydraulic fluid coming out of from brake linessss????????????

No if i'm not mistaken they come stock, ran up near where he said. But i ran mine out the back so i wouldn't spluge all over my front end.

EDIT: Awk beat me too it.

 

[Triplecrown421]

^^ nice i seee i seee

 

[Blaaster]

The end of the breather should be as high as possible, firstly to be above water, when it is taken swimming, secondly to stop syphon effect,

The end should finish up under the hood.