oil injection pump blockoff

[md1028]

hey guys,
i'm new to this forum and am looking for help trying to remove kickstarter. Does anyone know any easy way to remove this bolt, if it is reverse thread and what size nut it is. Thanks for any help.

 

[wompmonster]

The socket size you need is a 19mm to get the kick start lever. The shaft with the gears will pop out once you remove the side cover that has eight bolts. That size is a 8mm.

 

[ggaspo13]

hey guys,
i'm new to this forum and am looking for help trying to remove kickstarter. Does anyone know any easy way to remove this bolt, if it is reverse thread and what size nut it is. Thanks for any help.

Just had this off yesterday....19mm and NOT reverse thread. I found it easiest to push the kickstarter all the way down and then loosen the nut (counter clockwise). Might take a little torque to break it loose. Good Luck !

 

[md1028]

Thanks guys. Any recommendations on a good carb. Also what are thoughts on fatty pipe and power core 2 silencer.

 

[wompmonster]

I'm running a 33mm Keihin Carb and i like it. If you get your hands on a air stryker you would love it. FMF is not a bad pipe if your trailing. If your getting a good price i'd do it, but consider others as welland compare the prices.

 

[Larry's Shee]

I wouldn't let the kicker stop on the cover to break nut loose, might break something, like the cover

 

[ggaspo13]

I wouldn't let the kicker stop on the cover to break nut loose, might break something, like the cover

GOOD POINT ! That would have ruined my day if I managed to do that...

 

[Blaaster]

Thanks guys. Any recommendations on a good carb. Also what are thoughts on fatty pipe and power core 2 silencer.

Stock motor a Mikuni VM26mm is a fine carby to use.

Unless you go for a wildly modded motor running exotic fuel a 33, 35mm carb is an overkill and possibly will loose you power.

What info do you need on the Fatty and Powercore.

 

[joeak47]

The stock VM26 Mikuni carb works just fine. Even with porting and head re-chambering.