October 2012 BOTM Entries

[cbaber]

Entries for Blaster Of The Month (October 2012) are now open!

Please make sure you have read the following thread before creating your entry.
"Blaster Of The Month Entry Details, Rules and Requirements..."


Have a great time and GOOD LUCK!​

 

[xKroniK13x]

2006 Yamaha Blaster Special Edition​

​

Build Thread Here!​

----

Chassis | Suspension | Controls:
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stabilizer: N/A
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Stock with Maier Hand Guards
Throttle/Clutch Lever: ASV Black Levers (Both)
Grips: Pro Taper
Nerfs: DG Alloy Series Nerfbars with Custom Heel Guards
Bumper: Stock
Grab Bar: Stock
Front Shocks: Stock
Rear Shock: Stock
Brake Lines: Stock
Rims F|R: Stock
Tires F|R: Fast Trekker

Body:
Frame: 2006 Blaster Special Edition Stock Frame
Plastic: Stock Special Edition with some tweaking
Guards/Mounts: Custom metal heel guards
Graphics|Seat Cover: Special Edition Graphics and stickers from companies I used
Number Backgrounds: N/A
Handguards: Maier
Bar Pad: N/A
Fuel Tank: Stock

Engine | Drive System:
Cylinder|Head: Ken Oconnor Aggressive Trail Ported Engine and Head Mod
Piston: Stock Bore Wiseco ProLite Piston
Carburetor: Stock
Air Filter|Box: UNI High Flow Filter, Stock box with UNI Vents installed
Pipe|Silencer: Toomey Racing Pipe/Silencer
Clutch|Plates: Stock
Gearing F|R: 13/42 Primary Drive
Chain: Primary Drive
CDI: Stock CDI (TORS Eliminated)
Gaskets: Tusk

Other Mods Not Listed:
-vForce3 Reeds
-Project Blaster Air Scoops
-Emergency Brake Removed and Capped

Pictures:

​

 

[sporty982000]

2000 Yamaha Blaster


Chassis | Suspension | Controls:
A Arms:stock
Swingarm:stock
Steering Stem:stock
Stabilizer:none
Axle :stock
Carrier:stock
Locknut:stock
Hubs F|R:stock
Bars:stock
Throttle/Clutch Lever:stock
Grips: stock grips
Nerfs:none
Bumper:stock
Grab Bar: yes
Front Shocks:stock
Rear Shock:stock
Brake Lines:cable
Rotors F|R:
Rims F|R:stock
Tires F|R:stock

Body:stock
Frame:stock
Plastic:stock
Graphics|Seat Cover:none
Number Backgrounds:
Handguards:no
Bar Pad:no
Fuel Tank:stock

Engine|Drive System:
Cylinder|Head:stock
Bore & Stroke:67.50
Displacement:
Cam:no
Carburetor:stock
Air Filter|Box:stock
Pipe|Silencer:stock
Clutch|Plates:stock
Gearing F|R:12/41
CDI|Killswitch:stock
Cooling:air
Other:


See the build here: http://www.blasterforum.com/pics-vids-9/blaster-3-project-50722/

 

[89blaster89]

Chassis | Suspension | Controls:
A Arms:stock
Swingarm:stock
Steering Stem:stock
Stabilizer:none
Axle :stock
Carrier:stock
Locknut:stock
Hubs F|R:stock
Bars:stock
Throttle/Clutch Lever:stock
Grips: spider grips
Nerfs:none
Bumper:stock thanks slickerthanyou
Grab Bar: yes its stock and painted
Front Shocks:stock
Rear Shock:stock
Brake Lines: stock
Rotors F|R:stock
Rims F|R:stock
Tires F|R:dunlop for dirt, gbc sandsharks for sand!

Body:stock
Frame:stock
Plastic:stock
Graphics|Seat Cover:ceet racing
Number Backgrounds:
Handguards:none
Bar Pad: Protaper
Fuel Tank:stock

Engine|Drive System: stock
Cylinder|Head:stock
Bore & Stroke:68mm
Displacement: 195
Cam:haha no this is a 2 stroke forum!
Carburetor:stock mikuni 26mm
Air Filter|Box:twin air
Pipe|Silencer:Full FMF
Clutch|Plates:stock
Gearing F|R:stock
CDI|Killswitch:stock
Cooling: custom air scoops
Other: nacs bar clamp, pep shock covers, 03+ hood and light conversion, lots of sweat and hardwork

[/IMG]

[/IMG]

[/IMG]

 

[speedemon17]

 

[89blaster89]

wheres your specs list ^^^^

 

[Awk08]

wheres your specs list ^^^^

aur only allowed 3 pictures that I understood n the rules

READ THE RULES PEOPLE, THEY'RE QUITE SIMPLE TO FOLLOW, AND FIND, A LINK IS POSTED AT THE TOP OF THE PAGE
SPECIFICALLY .... FILL OUT SPEC LIST, 4 PICS MAX, NO COMMENTS/DISCUSSION IN THIS THREAD, AND DISABLE YOUR SIG BEFORE POSTIN IN HERE !!!!!.........




Requirements To Participate

1. Forum membership status of at least: 30 days*
2. Have a minimum post count of: 15 posts*
3. You may not enter the current contest if you have won a BOTM the same calender year.

*Does not apply to Supporting Members.


Rules and Guidelines

1. You must post a minimum of 1 picture of you blaster and a maximum of up to 4 pictures.
2. At least one of your pictures has to be taken from the side view.
3. Your pictures should not have any part of the ATV cut out.
4. You must fill out a modifications form and submit it along with your Blaster pictures.
5. You must unclick the "Show your signature" option in the Miscellaneous Options before you submit your post.
6. You may not post or comment anything in this section other then your entry submission.

NOT ONE OF THE ENTRIES FOLLOWED THE RULES, LOL

 

[xKroniK13x]

Shouldn't voting have begun? :-/

 

[89blaster89]

there i re-entered mine and followed all the rules, i tried to just edit or delete my first entry but it didint let me...

 

[Awk08]

there i re-entered mine and followed all the rules, i tried to just edit or delete my first entry but it didint let me...

new entry moved to original entries position above

not that any of these formalities mean anyhting to the voters, but once anything was pointed out, we all have to abide by all the rulesI:I

Shouldn't voting have begun? :-/

yes it should have, but sometimes starts a few days late, which is still plenty of time for everyone to vote...IMO