needle clip position

[blaster007]

Can somebody talk me through how to adjust the needle clip position.

 

[xJust_Causex]

Probably be easier to do a search on the forum for what you are looking for, I'm sure it has been covered before, probably in better detail then what you will get on a reply.

Levi

 

[hotrodaj_2]

To see if the setting is ok now, fire up bike and roll on throttle from 1/4 to full open. Take 2 to 3 seconds to do this, dont stab throttle, roll it on. If it dosnt run right then pull out slide from carb. Unhook throttle cable from slide. Inside slide is the needle, Move clip up (needle goes down) than equals leaner and vise versa.