Need Some Help On My Blaster

[Motocrossguy17]

Hi i have a 2002 yamaha blaster stock which is a nightmare i know. im needing help disconnecting tors system and also to see why my rear caliper won't work i changed the pads but they are just spinning on the disc and not gripping.

thanks

 

[Awk08]

tors removal....
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/

cable brakes........
http://www.blasterforum.com/do-yourself-20/cable-rear-brakes-how-make-them-work-3830/

upgraded brakes.........
http://www.blasterforum.com/miscellaneous-parts-154/awk08-gsxr-brakes-43258/

btw, i found all these using the search function at the top of the page

 

[Motocrossguy17]

so i took tors system off but still no difference quad is still going really low when you give it throttle. fully warmed up but still nothing. tried cleaned carb but still nothing anyone help please

 

[blasterdemon7]

Did you take the carb apart and clean inside real good? Did you take the pilot jet out and clean all the little holes on the side ? So a compression test and leak down test on it.

 

[Larry's Shee]

Unplug TORS "brain" box?

 

[Motocrossguy17]

hi yes fully cleaned carb with carb cleaner. and yes took the brain off all together thinking of taking the whole box of the top of carb and just have the carb its self.

 

[blasterdemon7]

Let us know how the compression test and leak down test goes.

 

[Motocrossguy17]

hi has anyone got any ideas on how to make a tester for the air as iv not a clue .

thanks

 

[blasterdemon7]

hi has anyone got any ideas on how to make a tester for the air as iv not a clue .

thanks

You can make one or buy one at a good price. Link in my sig for leak tester.

 

[Motocrossguy17]

thanks guys just heading down to take the tors system off all together and check the exhaust

 

[NOVIS]

is your parking brake suck on, or the sensor stuck on. remove the whole thing and take the sensor plug right out. that is exactly what happens when it gets stuck on. it wont rev up.

 

[Motocrossguy17]

hi guys iv completely removed the block of the top of carb. took parking break out well broke it off lol , now just need to get the kit on ebay for carb cap and the new cable and i should get it going properly i will update in next few days as got to order the kit

thanks guys for all the help

will update if i get it going properly . anyone know where i can get hydraulic brakes for this quad? as my caliper is packed in and won't grip with new pads need a new cable but would i be better with the shorty rear foot brake cable that doesn't go to handlebars like the stock one?

cheers guys

 

[Motocrossguy17]

ment to say i took the 3 screws out the exhaust but theres nothing there was clean as anything. no cobwebs! lol

 

[blasterdemon7]

hi guys iv completely removed the block of the top of carb. took parking break out well broke it off lol , now just need to get the kit on ebay for carb cap and the new cable and i should get it going properly i will update in next few days as got to order the kit

thanks guys for all the help

will update if i get it going properly . anyone know where i can get hydraulic brakes for this quad? as my caliper is packed in and won't grip with new pads need a new cable but would i be better with the shorty rear foot brake cable that doesn't go to handlebars like the stock one?

cheers guys

For a great rear brake ,look in my sig for awk08 GSXR rear brake kit review.