need more help on a 91 blaster

[whiterebel1218]

hi again all
got my blaster and the guy said all it needs is a coil so got a new one still no spark so someone said get a new stator did that still no spark so i got a used cdi box and two other electrical parts they were from a 98 so after changing ends put it all on and still no spark so the last thing i did was take the two wires from the on off switch and twisted the wires together still no spark can someone anyone help please thanks joe (i wish there was a repair place near delta ohio lol)

 

[04YamahaRider]

Have you changed the spark plug?

 

[Blasterr525]

if no spark, make sure none of your wires are cut or disconnected.

 

[blasterdemon7]

I may be wrong on this but if it's a stock Blaster, you have to apply the front brake before you start it. I think it has a safety switch that will not let it start if it's not on.

 

[04YamahaRider]

Could also be the grounds. If they are disconnected then no spark. Or a wire is grounding out that shouldn't be.

 

[Luni]

I may be wrong on this but if it's a stock Blaster, you have to apply the front brake before you start it. I think it has a safety switch that will not let it start if it's not on.

I dont think thats true. My girlfriends uncle has a bone stock blaster with TORS and oil injection still on it. Its never been messed with electrical system wise, and you can just turn the switch to run, turn the key to on and it starts.

 

[whiterebel1218]

yes a new spark plug and no wires are cut and i tried holding the brake in even clutch too is there anyway to tell by hooking a tester to the wires comming off the stator to test that cause im not the best at soldering