need help new to blasters

[ltg89]

I just bought this today and I have a few questions. What are these wires for? Im not sure where the go they are just hanging there and i got no clue?

[/IMG]
and also what part would I need to fix this? The disc actually moves by hand back and forth and I dont think it should haha.

[/IMG]

[/IMG]

Thanks for the help.

 

[Awk08]

you need new dust boots on that rear disc, as they just hold some grease in, and dirt out, and the disc is supposed to move, to facilitate even pad wear for the solidly mounted caliper

and those are the wires coming out of the stator,
and should be hooked color to color
it looks like they have the yellow/red stripe hooked to the black/red stripe
re-connect all of those color to color

in the wiring pic....do i see a crack in the intake boot ?
right near the end of the hose clamp
if so, better get a new intake boot, before ever even starting it again, or you'll be asking what piston is best next

 

[ltg89]

Ok, I did correct the wiring. Ill check the intake boot tomorrow morning. But thats the thing it dont start there is no spark. I did unplug all 3 tors connections so Im thinking the stator. It has a new cdi ( I think thats what its called).

Thanks for Replying

 

[blastersfaster]

Make sure you have a good ground it should be connected to the frame by the spark plug coil.

 

[Blaaster]

Awk has good lookin' eyes,.I:I

 

[1996BlasterBoy]

Correct Me if I'm wrong but I believe that you can check your stator with a voltage meter. It's alot cheaper than going out and buying a stator and then come to find out that it was your ignition coil.
Also once you fix that intake boot do a compression test and also a leakdown test just to make sure that no other spots are creating an air leak.

 

[scotj77]

I have a set of those boots for the rotor carrier. 10 bux shipped to ya if you are in the US

 

[ltg89]

Ok, Ill get back to you when I get paid. Thanks

 

[Larry's Shee]

put a little antiseize or at least grease on spline when you put it back together

 

[doodleaddict]

yea as larry said anti seize for sure nothing worse than stuck axle parts as I have found out