lonestar help
- Thread starter beaten blaster
- Start date
i'd get them straight from LSR..............
Lone Star Racing - A-Arm Rebuild Hardware - A-arm Rebuild Kit - Yamaha Atvs - $0.00
a call to LSR will set you free !
ricky stator also sales ball joints..........
Ricky Stator
but are they correct for our pinch bolt top spindle ?
i'd just get the LSR ones
Lone Star Racing - A-Arm Rebuild Hardware - A-arm Rebuild Kit - Yamaha Atvs - $0.00
a call to LSR will set you free !
ricky stator also sales ball joints..........
Ricky Stator
but are they correct for our pinch bolt top spindle ?
i'd just get the LSR ones
Last edited:
Haha I was looking at these same arms. If you google the part numbers you can find the ball joints on Ebay or from a supplier like Bike Bandit, they aren't cheap.
Here are the part numbers if you want to shop around:
2) 1987 Warrior Ball Joints #1UY-23549-0000 (Not included in kit)
2) Suzuki LT Ball Joints #51220-19A01 (Not included in kit)
2) #52418-24500 (Not included in kit)
2)# 09103-14003 (Not included in kit)
2) 1987 Warrior Ball Joints #1UY-23549-0000 (Not included in kit)
2) Suzuki LT Ball Joints #51220-19A01 (Not included in kit)
2) #52418-24500 (Not included in kit)
2)# 09103-14003 (Not included in kit)
by the looks of that pic above, you need tie rod ends, the stock/existing ones will work. they can be had anywhere................
New Set of 4 Yamaha Banshee 350 Tie Rod Ends End Blaster Raptor Warrior | eBay
btw...before you go buying blaster ball joints, another thing A/M a-arms let you do is run upper banshee ball joints and banshee spindles and hydro brakes will bolt right on, if you already don't have conversion spindles and hydro's ?
Last edited by a moderator:
i already have the 04 blaster hydro's installed..so my stock rod ends will fit?
Last edited by a moderator:
The Warrior ball joints are the lower ones. Here is a link for illustration but I wouldn't buy them, I think you can get a set of new ones for ~$75
Yamaha YFM350 Warrior Ball Joint | eBay
The LT ball joints are for the uppers. Here is a link but again shop around and you might find a new set for $50
Suzuki Lt F250 LT230 Lt F4WD Steering Knuckle End | eBay
The last two numbers appear to be accessories for the LT ball joints and they are cheap I:I
52418-24500 STOPPER KNUCKLE $4.81
09103-14003 SUPERCEEDED BY 09103-14008 $4.81
Definitely post updates and pics, I would have bid up to $300 on that set if I didn't think it was going to piss off my better half
Last edited by a moderator:
The Warrior ball joints are the lower ones. Here is a link for illustration but I wouldn't buy them, I think you can get a set of new ones for ~$75
Yamaha YFM350 Warrior Ball Joint | eBay
The LT ball joints are for the uppers. Here is a link but again shop around and you might find a new set for $50
Suzuki Lt F250 LT230 Lt F4WD Steering Knuckle End | eBay
The last two numbers appear to be accessories for the LT ball joints and they are cheap I:I
52418-24500 STOPPER KNUCKLE $4.81
09103-14003 SUPERCEEDED BY 09103-14008 $4.81
Definitely post updates and pics, I would have bid up to $300 on that set if I didn't think it was going to piss off my better half
so the warrior joints for the lower fit the arms and blaster?and same for lt joints for the upper with the arms and fit the blasty?
Last edited by a moderator:
That's what it looks like to me but I only did enough research to price out this swap. I'm guessing that Lonestar did this for a reason (stronger/more easily serviced ball joints?) and I would call them to clarify exactly what you will need.
ok i contacted lonestar today and they told me that they personaly do not sell the ball joints for the arms i bought #17-2111.. so i contacted through ebay atvgalaxy about the ball joints they have(the ones i posted)and all they tell me is that i need 4 of them and will not answer which ball joints i have posted will work..they look nothing like the suzuki ltf ones..im confused??any anyone chime in and clairfy? 8-|
i got all the parts in today and now im having a bit of trouble getting the warrior twist ball joint in all the way.im wondering if they "twist "all the way down? i got them to fit but as i turn twist more and more they become harder to move.i wonder if they go all the way in or not.anyone have the lonestar arms?
Similar threads
