does anybody on here know where i ca get a 4.5 inch suspention lift for dirt cheap for a 2000 dodge ram 1500????
lift kit??
- Thread starter blasterbum
- Start date
lol i have looked all over the net and i just cant seem to find a steel its kickin my ass lol
thanks
thanks
nah man don't buy one just make ya own the redneck way
Lift Kits
Ok let's talk about cheap lift kits. On a vehicle that has springs all the way around this one is simple. Figure out how high you want to go. Go to you local Industrial supply store and buy square metal tubing the diameter of how high you want to go. Cut them in equal lengths the same size as your current blocks that are on your truck. While there also pick up some U bolts that are long enough to go up past the blocks and over your axles. Wa la instant lift kit. Now depending on how high you go you might have to turn the axles. This is so your drive shaft doesn't get in a bind. Also check your steering componants. If you are only going 5 or less inches I have found on the most part no problems. If you are lifting 12 inches I can guarantee your gonna have to do some extra work.
When lift kits don't get ya where you need to be. Unless it's a daily driver or you want it to look nice, you can trim the fenders. Break out the ole cutting torch and have at it.
found this on rednektv.com
Lift Kits
Ok let's talk about cheap lift kits. On a vehicle that has springs all the way around this one is simple. Figure out how high you want to go. Go to you local Industrial supply store and buy square metal tubing the diameter of how high you want to go. Cut them in equal lengths the same size as your current blocks that are on your truck. While there also pick up some U bolts that are long enough to go up past the blocks and over your axles. Wa la instant lift kit. Now depending on how high you go you might have to turn the axles. This is so your drive shaft doesn't get in a bind. Also check your steering componants. If you are only going 5 or less inches I have found on the most part no problems. If you are lifting 12 inches I can guarantee your gonna have to do some extra work.
When lift kits don't get ya where you need to be. Unless it's a daily driver or you want it to look nice, you can trim the fenders. Break out the ole cutting torch and have at it.
found this on rednektv.com
Seems like your always trying to get a "deal" on something. Remember you get what you pay for. Driving a lifted truck with Generic knockoff sh*t that you saved a hundred dollars on is ridiculous.
Similar threads
