I'm parting out one of my three blasters. The frame was cut to swap this Kawasaki engine in. From what I know so far it's a rotary valve Kawasaki 2 stroke, unsure of the size. It starts up good and runs good but I think it needs some tweaking. The choke was cut but if you pull the cable with a pair of pliers it starts right up one or two kicks. I haven't ran it long enough to warm it up, it idles with the choke held by hand and idles alright with the choke off but stalls sometimes. Like I said I didn't run it long enough to warm it up. I would prob inspect the carb and clean it, it was leaking some gas out the bottom and prob do a leak test. It does seem to run good and strong, I have no use for it or interest to mess with it. It would make a good project motor for something. I'll try to get some pics up tomorrow.
$125 plus shipping or possible trades or partial trade towards aftermarket blaster parts. Let me know what you have.
$125 plus shipping or possible trades or partial trade towards aftermarket blaster parts. Let me know what you have.
