I got a 240 BB kit and 35mm pwk air stryker carb. Right now I have a 138 main and a 50 pilot with a DGK needle in the middle position. What jets should I be running?
Jetting
- Thread starter Corey
- Start date
no one can tell exactly whats needed, plug check and see what it needs, but as a staring point i would bump ur main up to 150 and go from there
Right now its too rich, it still bogs a little. I really just need to know what pilot i should be running, i have a 138 main that im going to a 135 or 130 then i don't know about the pilot.
turn the air screw out 2 turns start the bike and tune the idle and air screw and get it to idle and run right up to 1/4 throttle....then work on the main...your bog sounds like its not getting enough fuel...whats the plug look like??? a 138 main seems rather small for a 240 BB
Are you running open airbox with a foam filter or a gauze (K&N) filter? Just turn that a/f screw in all the way. then back it out 2 turns. Go from there. Start at a 150main
I have a direct k&n pod clamp on. And a 150 is too rich. All i need to know is the pilot jet. I'm going to bump it down to a 135 or 130 main and like a 40 or 45 pilot.
