Ok so I took the Blaster out today in the mud. It started to bog and just killed. I towed it back and checked the air filter, it was dry. So I cleaned it and replaced the spark plug. I then noticed that I used too much oil in my mixture. I drained the gas and put some 40:1 in. I kicked it repeatedly to no avail. So I pulled the carb and it was clean. I tried kicking it again with the throttle pinned, and it started. But now it runs terrible. The guy I bought it from said he jetted the beginning of this season. It only gets to a certain RPM and holds there and won't idle. Is that jetting? I'm just surprised a newer jet kit would change because I flushed too much oil through it. Can too much oil screw up jets? Thanks!
