LaCuRaApR Member Dec 10, 2012 29 7 44 48 Puerto Rico Dec 19, 2012 #1 What size is the oem main jet?:-/
slickerthanyou New Member Dec 23, 2009 7,615 140 0 Dec 19, 2012 #3 Also 220 has been stock on some models.
B blasterBruce Member May 13, 2008 2,379 41 84 Griffin Ga Dec 19, 2012 #4 slickerthanyou said: Also 220 has been stock on some models. Click to expand... Was not aware of that , Good to know Slick !
slickerthanyou said: Also 220 has been stock on some models. Click to expand... Was not aware of that , Good to know Slick !
slickerthanyou New Member Dec 23, 2009 7,615 140 0 Dec 19, 2012 #5 I think it all depended on where you lived? Higher elevations thinner air= less jetting required
Blaaster Moderator Staff member Technician Jul 18, 2011 15,384 1,120 165 eastern australia Dec 19, 2012 #6 Oceania models were fitted with a #220 main jet, because of the higher ambient temps.
slickerthanyou New Member Dec 23, 2009 7,615 140 0 Dec 19, 2012 #7 Blaaster said: Oceania models were fitted with a #220 main jet, because of the higher ambient temps. Click to expand... Now that makes sense! Thanks for clearing that up!
Blaaster said: Oceania models were fitted with a #220 main jet, because of the higher ambient temps. Click to expand... Now that makes sense! Thanks for clearing that up!
LaCuRaApR Member Dec 10, 2012 29 7 44 48 Puerto Rico Dec 20, 2012 #9 What size is recomended for port polish and full fmf exhaust ?
Awk08 Administrator Staff member Technician Jan 30, 2009 24,427 2,294 175 Usa Dec 20, 2012 #10 i've owned 3 blaster.... 1 brand new, and worked on at least 5 others, all had a 230 main jet in this region of the US. LaCuRaApR said: What size is recomended for port polish and full fmf exhaust ? Click to expand... i like to start way big, for those mods and your elevation in PR, i'd buy 300/290/270/260, start big and plug chop down to perfection, then maybe throw 1 size larger in for temp changes without having to rejet daily
i've owned 3 blaster.... 1 brand new, and worked on at least 5 others, all had a 230 main jet in this region of the US. LaCuRaApR said: What size is recomended for port polish and full fmf exhaust ? Click to expand... i like to start way big, for those mods and your elevation in PR, i'd buy 300/290/270/260, start big and plug chop down to perfection, then maybe throw 1 size larger in for temp changes without having to rejet daily
LaCuRaApR Member Dec 10, 2012 29 7 44 48 Puerto Rico Dec 20, 2012 #11 Ok! I try with that...thanks man!