jet for procircuit exhaust system

[Rease3]

i looked up the specs for the exhaust and it i said to put a 240 in there. i dont have a air filter and i have the lid on. will the 240 be enough for just the exhaust till i get a filter

200 BLASTER 1988-2002 230 32.5 STOCK
Pro Circuit 1988-2002 240 32.5 STOCK STOCK

 

[FLOTEK]

start slighlty higher like 260 and work your way down .on a side note if you leave the lid on and the stupid snorkel ..that thing is nevergoing to produce strong power ,a good filter liek a K&N makes a big difference in response and lowend torque.

 

[Rease3]

im going to order a filter now. will this one work?

http://www.vitosperformance.com/atv_parts/product.php?productid=629&cat=238&page=1

also i want to remove my tors and oil block off. should i buy the kit from vitos

 

[2smoker85]

you can get the parts cheaper off of ebay or rjatv or d2moto, etc there are so many companies, but look ebay first, they seem to be way cheaper than vitos.

 

[Rease3]

ok well i put a new filter on and took off the lid and snorkel. havent driven it yet but wanted to know if i should still buy a 260 jet or get an all out kit

 

[2smoker85]

if i was you i would start with 260-270, and see where you are at

 

[Rease3]

when i called the shop they told me not to throw jets at it. and to just buy a kit. is this bad to do or nah