Intake Manifold

[GetTwiztid666]

I just recently bought a cpw 30mm carb for my '98 blaster. The assholes say oh hey it is like a stock replacement fits old boots and everything.... Well this so happens to be a load of sh*t as about every performance part takes some tweaking to put on. Anyways my stock intake manifold is for a 28mm (obviously) and it leans towards the left (towards the clutch cable) and if i were to clamp on my new carb it won't seat right and the clutch will rub all over it. I found different replacements but one was for 26-28mm and the other 32-36mm... the intake manifold needs to be straight (not curved like the stock one) so i don't have to worry about my carb falling off and being rubbed on. Or is there a way to jimmy rig this? lol (when isn't there)... Any help would be very appreciated... i just want to ride the damn thing.... just bought a fmf gold series fatty exhaust and silencer, AMR racing CDI, Monster Racing coil and the 30mm cpw carb and i can't even ride it yet cuz of this

 

[mr_3_0_5]

reed spacer will solve your problem i believe

 

[darealblaster]

correct,reed spacers,thats what they are for.

 

[pittboss45]

Twist the carb to the left slightly and all will be fine.

 

[98blaster]

i got a 30mm cpw carb on my quad and it fits the stock boot fine and is close to the clutch lever but it dont hit