Ignition Problems

[450killer]

Ive got an 01 Blaster that I've rebuilt and ow it has no spark. I changed the pulser coil because it tested bad however still no change, the ignition coil tested ok. what else could it be?

 

[wooten]

maybe a wire broke or unplugged,don't know right off but good luck with the problem!

 

[450killer]

unfortunatley I checked all the wires on the entire machine and everything is tip top is it possible to have a bad flywheel?

 

[regal81455]

make sure your getting good grounds at the ground locations...

 

[I8ford]

make sure you turn on the key .

 

[450killer]

Checked the grounds and obviously the key switch still nothing I asked my local Yamaha shop and all they said was bring it in and we'll take care of it for 85 bucks an hour I've run out of ideas.

 

[Blasterb0y794]

sparkplug maybe, i had a problem with my flywheel i took off the cover and there was dirt everywhere cleaned it and it ran perfect see if there is dirt in ur flywheel

 

[450killer]

Just checked out the flywheel and it looks to be okay I cleaned off and put it back on with no change. If the flywheel was to go bad would the magnets be weak bcuz they are no where near as strong as the magnet on my banshee.