I am looking to get a new ignition coil for my 91 blaster and im new to this area of my blaster, but i was looking at them and i saw a few and none of them had the plug boot on them so what do i do about this? and the second question is what am i looking for? or which one is the best?
Ignition Coil
- Thread starter ecurbd02
- Start date
Any stock coil is going to be the same for the blaster. if you are looking for power then go nology profire. If they don't come with a plug boot or clip you can buy universal ones usually at parts stores. Probably could take one off a lawnmower even. There are 2 types of end pieces, one you just prick through the end of the wire, and one you have to strip the insulation and crimp on.
I was looking around and i couldnt find a nology profire, specifically for the blaster so that brings me to my next question, are mostorcycle/atv ignition coils bike specific? and while i was looking around i found this: http://cgi.ebay.com/ebaymotors/AMR-...2664255QQptZMotorcyclesQ5fPartsQ5fAccessories < would that be as good if not better than the nology coil?
Last edited by a moderator:
http://www.factory7atv.com/PBelectrical.htm has one. If not you need the ProFire PFC-03S according to Pauly B, and yes they are specific. The blaster requires .3ohm cdi 2stroke dirtbike. there is also a.6 not sure what for. I would just get the nology they are considered by far the best, and its around the same price. http://www.nology.com/form.html give them a call and ask which one to be sure.
Last edited:
