IDLE

[MrLyricalLiquor]

Hey everyone i just recently purchased a blaster i have always ridin quads since i was about 8 years old but i never had to repair one although i can if needed i ran into a problem were i need to get a new carb so i purchased one from ebay but i know cant get MY 2002 blaster 200 2 STROKE to start i got it to start 3 times with the choke on but when choke is off it wont start i was told i need to idle it now i Know the location of the nob and screw needed to idle but i hav the slightest clue as to how to go about this i turned the nob and screw a little but now i cant even get it to start on a choke any one think they can guide me threw this process??? It would be greatly appreciated thanxxxx

 

[scotj77]

there is also an idle air screw on the left side of the carb that is a flat head screw. screw it in all the way then back it out 1.5 turns

 

[DirtDiggler]

so what kind of carb did you buy? Is the TORS system still hooked up? Whats the Jetting on the new carb , what kind of Mods have you done to the Blaster?
Have you done a Compression Test? Have you Done a Leak Down Test?

 

[scotj77]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I was startin simple and then gonna graduate to the other stuff once he at least had one thing right on the carb