on ebay i found a banshee axle that is +2or +4 for a banshee, if a stock banshee axle works then i could use this as well correct?
i need help quick please
- Thread starter fmxr47
- Start date
I looked it up on Yamaha parts diagrams for you and they are different part numbers..... But if a stock one works than i see no problems.
thx, man i know for sure the stock fits so im gonna bid on it, youll find out in 15 minutes whether i win it or not
just won it for $113.50 its a banshee axle that is +2or +4 its dure bluem so the +4 on my bike should be+6 i believe, im so excited to get it mounted to my extended swinger
So, does a stock banshee axle work for sure??
I guess you would just have to use the Blaster carrier?? Does everything else just bolt right up?
I was thinking maybe the brake rotors were different sizes...?
I guess you would just have to use the Blaster carrier?? Does everything else just bolt right up?
I was thinking maybe the brake rotors were different sizes...?
yeah the stock banshee axle bolts right on, the hubs from your blaster will works, im not sure about the brakes and everything, but blaster stuff fits right on it
Yeah,
I know the Banshee hubs are the same- I have banshee hubs on my blaster right now..
I have a practically brand new banshee axle in the carrier w/ new bearings and I want to install it on my Blaster. If I used the banshee carrier, I would need to run the banshee rear brake setup..
This isn't an issue, but I wonder about the rear brake foor lever, and making it work w/ the shee master cylinder.. Plus, I'd have to weld a bracket to the frame for the cylinder.
I dont have an issue w/ the Blaster brakes, so I was hoping I could just use the shee axle & be done with it... I might play with it this weekend.
If youre sure I can use a Banshee axle in a Blaster carrier w/ Blaster brakes, then I'm going for it.
I know the Banshee hubs are the same- I have banshee hubs on my blaster right now..
I have a practically brand new banshee axle in the carrier w/ new bearings and I want to install it on my Blaster. If I used the banshee carrier, I would need to run the banshee rear brake setup..
This isn't an issue, but I wonder about the rear brake foor lever, and making it work w/ the shee master cylinder.. Plus, I'd have to weld a bracket to the frame for the cylinder.
I dont have an issue w/ the Blaster brakes, so I was hoping I could just use the shee axle & be done with it... I might play with it this weekend.
If youre sure I can use a Banshee axle in a Blaster carrier w/ Blaster brakes, then I'm going for it.
yeah you don't need the banshee brakes, all the measurements are the same but i have only measured i haven't test fitted, but i do know several members that have banshee axles and say it is bolt on no mods needed, and that u can use all your blaster stuff
