I have to put it off again

[Joey_Stacks]

Well Im 4 parts away from finishing the 100$ blaster project and I just got hit with a whole bunch of bummers. First I sold my old wrecked motorcycle to get new motor mounts for my car... I couldnt get what I wanted out of the bike let it go for 125$ I could have parted it for more but I needed money FAST I figured get the mounts and pull the motor and get it done But lucky me now I got brake issues in my truck that I priced out at about 80 bucks which is funny cause thats about exactly how much Its gonna cost for my blaster parts
Reed spacer
carrier bearings
oil block off kit
Chain tensioners
not too mention a couple screws for the plastics are missing, one of the lug nuts, and the upper chain roller... Now Im just bummed out but hey tommarow is a new day and I might just be able to pull something off to get the blaster on the trails

 

[ATVkid2002]

theres the spirit m8'

 

[Joey_Stacks]

the sad thing is Ive had this thing since april when I joined and had it running once before I discovered an air leak in the carb threads

 

[ATVkid2002]

still your not giving up which is a really good thing keep up you get it eventually

 

[Awk08]

i've heard carrier bearings can be had at napa autoparts for $8 a piece, and chain tensioners could be had on here or ebay for under $10 prolly, why the need for a reed spacer, i'm runnin a 34mm pj without one, and i just made an aluminum plate with a little silicon on it to block off the oil pump hole, or some guys just remove the plastic gear and ew-install the pump to block off the hole < all free, but be sure to get a small cap for the carb port, or put some silcon and a screw in the hose to block it off
and theres always fishing to clear your mind!!!!!!

 

[Joey_Stacks]

well it got worse now I cant get my brakes on my truck to bleed right... every time I bleed them I start the truck up and the pedal goes to the floor. I bled them 3 times now and still get mushy pedal

 

[super noober]

well it got worse now I cant get my brakes on my truck to bleed right... every time I bleed them I start the truck up and the pedal goes to the floor. I bled them 3 times now and still get mushy pedal

ive had brakes be quite a biotch before man, just keep bleeding em. dont sweat the balsty man, its just the very beginning of summer. you dont really need the block off kit like awk said you can jsut remove the little plastic gear on the pump and reinstall it then block off the hosed and the little nipple on your carb. i ran a 34mm with the carb tilted for a while, i did end up getting a spacer but it was ok without it. bageds10 was jsut talking about a spacer he was willing to give away jsut pay shipping, dont know if that offe ris stil good but mabey shoot him a pm. good luck man, it took me 7 months to get mine going