how to set

[89blaster89]

how do you properly set a brand new base gasket and a anealed head gasket? i used search and everytime i search it says fatal error

 

[89blaster89]

anyone?????????

 

[Blaaster]

3 heat cycles and then re tension the bolts.

 

[89blaster89]

3 heat cycles and then re tension the bolts.

do i leak test it before or after i do this?

 

[Blaaster]

A leak test should be done before you start the motor.

 

[89blaster89]

A leak test should be done before you start the motor.

ok and what exactly do i do in the heat cycle? just start it up and let it idle for a few minutes then lightly ride around? the topend isint being rebuilt just taken apart and inspected

 

[Blaaster]

Start it up, blip the throttle often until it gets to operating temp and let cool for at least 30 mins.

Do this 3 times.

If you let it just idle you will possibly foul a plug.

Then re tension head and, jug and spark plug and then ride.