how can i tell if i have the tors

[Jrodfolyfe]

i know how i tell if i have the tors but then again idk if i do have it ????

see if that works and yeah do i have it ?

 

[kep3vin]

go to tiny pic copy direct link and use the pic upload icon in the form

 

[Jrodfolyfe]

its this Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

 

[Jrodfolyfe]

http://i44.tinypic.com/vys5kj.jpg

 

[brandoz28]

those wires are for the tors

 

[fioz600r]

What year blaster do you have? The T.O.R.S. is a system not just a single piece. There is the T.O.R.S. unit on top of the carb cap, the T.O.R.S. brain nder the front hood and then the part of it that goes to the throttle that your picture is of.

 

[kep3vin]

or that works is the big thing off the top of the carb plugged in? try search theres alot of tors thing in here

 

[Jrodfolyfe]

here is the carb http://i39.tinypic.com/2mha0cw.jpg

 

[kep3vin]

and check the box under the hood if ur older than 03

 

[kep3vin]

above the carb is big ugly thing

 

[fioz600r]

When I removed My T.O.R.S. I took every thing out of the Blaster all the parts and removed the wires from the harness. Just like it was never there.

Oh here is a pic of the T.O.R.S. unit on top of the carb..

 

[Jrodfolyfe]

its a 2003 and yeah im gonna do research on it right now

 

[brandoz28]

the tors is probably still there then. if its not giving you any problems, don't worry about it

 

[kep3vin]

yupp that^^^^1515

 

[fioz600r]

This is the best T.O.R.S. removal DIY I have seen....

T.O.R.S. Removal - E2S

Better check it quick everytime I post a thread from this site my post get erased...

 

[kep3vin]

if it 03 its a lil harder but its here when i did mine i used a new carb and cut and looped the wires at the cdi hvent tried it yet still building

 

[fioz600r]

I think they are alittle differant between 88-03 and 03-06 model years..

 

[brandoz28]

it is a little different for the 03-06

 

[kep3vin]

03+ doesnt have a brain externaly anyway its insige the cdi

 

[brandoz28]

i think all you have to do is loop the wires for the tors at the CDI...but i could be wrong