Handle Bars (help :p)

[Herpderplol]

So im having trouble deciding on which bars to get...
I have these picked out so far:
Renthal Handlebars Racer Bars 7 8 Handlebar Honda RC High Red | eBay
Pro Taper 7 8" SE Aluminum Handlebars Honda CRF 50 Jet Black 025262 | eBay
Pro Taper 7 8" SE Aluminum Handlebars Trials Hi Jet Black 025311 | eBay

First of all, will all of them work for blaster? And then, which ones are the best??

Thanks I:II:II:II:I

 

[Awk08]

do not buy bars for a 50cc bike, they're listed as only 28" wide, versus 31" for the others
and you know you'll lose your dash/keyswitch with the crossbar that low ??
get an atv high bend for added height and more comfort when standing, and possibly keep your dash/key ?
most bike bars don't have the "control length" for a thumb throttle and hydro master, and if so...leaves no room for hand gaurd mounts

have you checked the tusk and msr's ?
1/2 price of the renthals and protapers.........
ATV Handlebars | Rocky Mountain ATV/MC

 

[Herpderplol]

Well, I have 03, so key is on the side. I didn't know one was a 50cc, and my bars seem really low to me. I didn't get around to other brands, and I didn't think of rocky...

Thank you awk

The ones on rocky seem just as low as the ones I have picked out...

 

[Awk08]

The ones on rocky seem just as low as the ones I have picked out...

only an atv high bend will have the cross bar higher, mid bend a little higher than what you see, which may just be a stock photo, study the charts to see the different widths, rise, control length and sweep of each bar. (it's down in the details of some on ebay, or go to pro-taper/renthal/moose ect. website for the details of each bar)
i can tell you, you need 8+ inches of control length, and most bike bars lack that, only bars designed for atv's have enuf for the added thumb throttle width
those ones for bikes are really low, and like i said, the thumb throttle and master cylinder may not fit, they are made for a twist throttle and a master, then bend down towards the mounts.

choose wisely grasshopper I:I

 

[Herpderplol]

I don't know anything about bars, that's why I made this lol

And I will have twist by the time I get bars I:I

 

[Awk08]

I will have twist and broken bones I:I

fixed !!!!

 

[Herpderplol]

 

[Awk08]

ok, a little lesson on bars for you, trust me, you want atv bars, not bike bars............

the measurements are in MM's

 

[Herpderplol]

Lots of numbers and lines... I will never understand them

So I like red and black (hint*)
And apparently ATV style (hint*)

Get it... Hint hint

 

[Awk08]

hint hint my A$$, LOL...............

Outlaw Racing Motorcycle ATV Quad MX Handle Bars Handlebar 7 8 High Bend Black | eBay

 

[Awk08]

MSR Carbon Steel 7/8" Handlebar | ATV | Rocky Mountain ATV/MC

 

[Herpderplol]

So both the bars you posted links for will work fine for a blaster? They don't look "high" like you kept saying

 

[Awk08]

So both the bars you posted links for will work fine for a blaster? They don't look "high" like you kept saying

forget the pics, thats not a porn site
they use the same pic for every ad.
you actually have to read the height in the chart.
atv high bends will work

 

[Herpderplol]

forget the pics, thats not a porn site
they use the same pic for every ad.
you actually have to read the height in the chart.
atv high bends will work

Would be nice if they put actual picture... But then you know they don't look as good and people don't buy em