got traction???

[4cfed]

just over 2 hours to do 3 tires....

front tire.. stainless sheet metal screws down the middle, with kold kutter studs on the wide lucks for turning, rears.. ALOT of kold cutters, with one sheet metal screw per middle lug, and one on each out side lug for tossin the ice roosts

 

[Awk08]

looks good fed, i got my old set of turf tamers on my stock rims, do ya think the short sheetmetal screws will work on them

 

[gearhead04]

I:I clap! Clap! I:I

 

[4cfed]

sheet metal screws work no where near as good as kold kutters BUT there 100% better than bare tires!!! i ran 330 per rear tire on my blaster last year.. it would spin in first and a lil in second on ice but it hooked enough i could hit the ice oval in 6th and be in control

 

[The Ox]

If you dont use a screwdriver and use a drill it makes it a little faster. Jk,,good job.

 

[specialized7]

yep looks good! im going to do my rears only this year just because my fronts are brand new

 

[4cfed]

OX i did use a drill... seems everything takes longer when your sittin on a milk crate in a garage with no heat!!


specialized.... you will never turn.. its just gonna push the front end if you dont have any in the front