Good pipe for a 240cc

[jav]

I've got a blaster with vitos 240 big bore kit and want to get a good pipe. Can anyone tell me what kind will work well with a 240cc?

 

[darealblaster]

from what ive heard and read the fat bastard pipe is just the thing for it.I:I

 

[twinstaxx]

fat bastard

 

[89custom]

dyno port high volume. do NOT get a fat bastard, ive heard alot of unhappy people who've bought them for the 240 kits, and some pretty signifagant engine builders.

 

[FLOTEK]

it wil l greatly depend on what you plan to do as far as riding style and what your engine setup is etc.. but power pros f7 dynoport for play motors id look at RDZ or CPI out of frames for full drag engines

 

[codykeon18]

I also have a 240 kit with a coupl other mods but i just run a fmf fatty with a power core 2 silencer. If i switch to one of those pise listed above how much of a differance will I notice. I mostly just play around or trail ride.

 

[jav]

Thanks for the help.

 

[Blasterb0y794]

I also have a 240 kit with a coupl other mods but i just run a fmf fatty with a power core 2 silencer. If i switch to one of those pise listed above how much of a differance will I notice. I mostly just play around or trail ride.

You will notice ALOT in power difference. FMF pipes are good for low modified blasters. If your running a 240 kit, the FMF is restricting it. You should go with a fat bastard, dynoport, f7 or an lrd.

 

[jav]

Could a factory 7 exaust be called a phantom proformance? On project blasters site it says thats what they were previously called.

 

[coreyownz]

yep sure can

 

[djack12]

all project blaster did was change their badging. furthermore all that pipe is is a Power Pros. same with LRD, and a few others.

 

[blanshee]

ct racing is a good pipe . they sell a 240 kit and make a set up for it.

 

[245stroker]

lrd pipes are not power pro's. power pro's, ct, f7 and trinity are all the same pipe

 

[djack12]

thanks 245stroker. its hard to keep track.

 

[Blasterdude27]

What about cpi in frame pipes?

 

[Unstock240]

lrd pipes are not power pro's. power pro's, ct, f7 and trinity are all the same pipe

I thought trinity looked similar to the f7.

 

[jav]

would a toomey b1 restrict it?

 

[Braapbraap95]

yes, it would. Get a dynoport or an lrd!

 

[blaster biotch]

i am happy with my dyno port on 240 +3

 

[con8quest6]

i am happy with my dyno port on 240 +3

yeah ive had my dynoport for years now and i like it more than just about all the non-drag pipes ive seen/used and thats a lot.