Full Wiring Diagram

[RatBlaster]

Here is the full wiring diagram I made in CAD. I also have a diagram in the engine section that labeled "easy wiring diagram" that shows the wiring without oil injection, tors, and the other bs.

 

[danstafford]

I could donwload the diagram just need to no the wires for the rear lights on my 98 240 thanks

 

[Sparrow89]

the two wires for the rear light should be a blue and black wire

 

[slickerthanyou]

Here is the full wiring diagram I made in CAD. I also have a diagram in the engine section that labeled "easy wiring diagram" that shows the wiring without oil injection, tors, and the other bs.

That's nice, just need to add one for the 03+ models, just a bit different! I:I

 

[danstafford]

Thanks. The back part of the harnis has hack off and all the black wires are twisted to gether. But thanks though

 

[Carp]

I have aftermarket lights and they light up, when they are connected to a outside source, But I hooked them up to the green wire and connected the two ground wires to the frame, but they wont light. Did I miss something, plus when the blaster is running I have no juice to the blue or black wire where the tail-light goes, is my regulator bad????
Little help please..

 

[1piglife]

foure wires come out of my stator but in the diagram i only see two

 

[dre2992]

hello how dose the voltage regulator work in the blaster

 

[Blaaster]

Might pay to start a new thread.

The regulator stops the AC voltage from rising above 14 volts.

 

[dre2992]

Might pay to start a new thread.

The regulator stops the AC voltage from rising above 14 volts.

ok i put two led lights on my blaster with the main head light everything stays the same i just want it brighter is there anyway i can

 

[Blaaster]

are you using the stock headlight?

 

[dre2992]

are you using the stock headlight?

yes