front and rear sprocket

[BlasterCrazy]

I want t still use my stock swingarm but Im going to be runnin about 35hp wat setup should I use for my sprockets so I can still run my stock swingarm

 

[yb200]

14/40 .

 

[gsugarek]

14/40 is a great set up. Also you may want to try 13/38 set up. A 14/38 is basically the same as stock, I have a 14/38 setup thinking I would get a higher top speed, not true, i ended up with same top speed as stock. Im going to try the 13/38 set up and see what my top speed is. So far I really like the 14/40 setup, it has given the highest top speed. Ill post how the 13/38 works out. Peace.

 

[yb200]

14/40 is a great set up. Also you may want to try 13/38 set up. A 14/38 is basically the same as stock, I have a 14/38 setup thinking I would get a higher top speed, not true, i ended up with same top speed as stock. Im going to try the 13/38 set up and see what my top speed is. So far I really like the 14/40 setup, it has given the highest top speed. Ill post how the 13/38 works out. Peace.

the bigger the front and smaller the rear for more top speed

with a 14/38 you will have no bottom end atleast with a stock motor

youbest bet and most commom is 14/40

 

[motoman9911]

1 tooth in the front is about the same as 3 in the rear.