FMF Flange

[quadsrus1]

Can someone post a pic of a FMF flange?

 

[quadsrus1]

Bump:151515151515

 

[blasterdemon7]

 

[quadsrus1]

OK so where does the spring hook to???

 

[blasterdemon7]

There's a loop on the other side.

 

[blasterdemon7]

 

[01BLAST3R]

good pics demon^^^^^^^

 

[quadsrus1]

See mine don't have that loop WTF

 

[piezzi]

If you don't have the flange loop, then you can hook it between the cooling fins on the jug. There's a cross bar between 2 of the fins that you hook it to.

 

[xjma]

any way to get the flange other than directly from fmf for 35 bucks?

 

[quadsrus1]

If you don't have the flange loop, then you can hook it between the cooling fins on the jug. There's a cross bar between 2 of the fins that you hook it to.

OK thats what i was going to try do you know where i can pick up the o rings?

 

[quadsrus1]

any way to get the flange other than directly from fmf for 35 bucks?

FMF is the only place that you can get one unless you find someone on hereor ebay

 

[piezzi]

OK thats what i was going to try do you know where i can pick up the o rings?

I got mine from the local dealer for like $7, but you can find them on ebay too.

 

[quadsrus1]

I got mine from the local dealer for like $7, but you can find them on ebay too.

Would you happen to know the specific size i would need?

 

[quadsrus1]

And are the O-Rings a must???

 

[piezzi]

And are the O-Rings a must???

The "o-ring" is a gasket that sits in the recessed area of the head between the head and flange. They only come in one size and probably aren't a must for the FMF as long as you use some copper RTV. If your talking about the FMF o-ring that goes between the head pipe and the flange....not needed. Just use the copper RTV as suggested to you in a previous post.

 

[quadsrus1]

The "o-ring" is a gasket that sits in the recessed area of the head between the head and flange. They only come in one size and probably aren't a must for the FMF as long as you use some copper RTV. If your talking about the FMF o-ring that goes between the head pipe and the flange....not needed. Just use the copper RTV as suggested to you in a previous post.

I don't have Copper RTV buty i do have some Red RTV gasket Maker will that work???

 

[slickerthanyou]

I don't have Copper RTV buty i do have some Red RTV gasket Maker will that work???

As long as it says high temp your good! Oh and give it overnight to dry before ya fire it up and it will be all good!

 

[quadsrus1]

As long as it says high temp your good! Oh and give it overnight to dry before ya fire it up and it will be all good!

Ok cool yea i have some high temp in the garage from when i did my old 97 rm80 exhaust that rm 80 was completely modded A BAT OUTTA HELL

 

[fiveohfanatic]

So is there a way to make a flange or someone else that carries it? FMF wants 12 bucks to ship a 5 dollar part that is already marked up 30 bucks. Amazing, buy three of these and you bought your pipe all over again.