Exhaust and Fuel Mixture Question

[portage_man]

I just bought a 2003 Blaster this past weekend. It has a new Vitos Complete Top End kit putting it .050 over with internal upgrades. It also received Reeds, Reed Spacers, a Paul Turner Pipe, an Upgraded Clutch, K&N Filter and All New Carrier Bearings. The question I have is, what would be a good silencer/spark arrester to put on my machine? Also, the person I bought it from told me the fuel mixture is 30-1. For the upgrades it has does that sound about right? I'm somewhat new to this so I'll take any comments on how good or bad these upgrades are. The machine runs great and starts on the 2nd or 3rd kick, even up here in Michigan where it has been pretty frigid.

Thanks for anyones input.

Jake

 

[hickskateboarder]

most people run 32:1 premix on here. silencers aren't as consequential as the pipe, but someone on here has a paul turner, don't remember who it is but hopefully he'll get on and help you out with what silencers fit. on second thought, does it have the stock silencer on now? if it does you have a pretty good selection, i think about anything fmf or dg should fit. it's probably jetted good since it's not blown up, but you may want to check it just to be sure. look in the diy section of the forum for plug chop or jetting and it'll tell you how to check the jetting. you don't want it runnin lean.

welcome to the forum.

 

[portage_man]

Thanks for your input, I'm pretty sure it has a stock silencer on it.