entire bolt specs.
- Thread starter baseballertc14
- Start date
If i were you I would go on ebay and search for "yamaha blaster bolt set" A kit will pop up that replaces every single bolt on your bike with a nice stainless one. They cost like $119 and is going to be a lot easier then mix and matching bolts at the hardware store.
Good luck finding the answer to that. ^^Do what he said. There are quite a few specialized collar bolts and nuts that you wouldnt be able to find in a hardware store If you need all of them. You could go through a manual and count them lol.
ya I know about that but I was wonderin if anybody knew them cause I pretty much would get them for free since I work at a ace hardware. Watever I can do to save money
well then how about this. you take off say 10 bolts and nuts at a time, get the ones you need and then put the new ones on. then do it untill your done. should only take you about a week.
you have a blaster, you have a toolbox, you have a pencil and a piece of paper, you have a tape measure. if you can get nuts and bolts free,than invest the time to find out what you need.
LOL^^^^^ Now that you posted that I realize that dang some people are lazy!
Also, that's pretty good that you can get all the bolts for free....I would guess that at a hardware store it would be $3-400 worth of bolts....Unless they are "free" because you dont ask and just take.
Also, that's pretty good that you can get all the bolts for free....I would guess that at a hardware store it would be $3-400 worth of bolts....Unless they are "free" because you dont ask and just take.
when I built the big blue bike, i bought the stainless bolt kits off ebay, bought a blaster kit, a banshee kit and a 250r kit. had pretty much all I needed after that, with spares.
hellzyes!! first thing replace all the screws on the motor with the allen heads!
EXCEPTIONS: grade 8 stuff, a-arm mounts, carrier bolts, shock bolts, grade 8 is stronger than stainless.
EXCEPTIONS: grade 8 stuff, a-arm mounts, carrier bolts, shock bolts, grade 8 is stronger than stainless.
also.. i think a great DIY post would be posting this found info, what bolt sizes go where,.... i think that would help alot of people out that buy a blaster with parts missing or removed and no hardware.... trust me it sucks had a 61 caddy with the front end removed and no damn bolts.. it sucks
yea i was wonderin about the sizes not because im lazy but because i took my whole bike apart and didnt think to save them and put them where they need to go
well on a blaster, there are not that many different size bolts...Should be pretty easy to put the bolts in their proper spot.
well they are all mixed up i was just wonderin if anybody knew tha specs. it would be great to have
kind of a lazy question. not really something good to have, id say just you would need it, instead of many people. so if you didnt think to put em in a bag and mark the area or something, or just even know the bolts and sh*t, your own fault and stop being lazy and figure it out yourself.
sorry but its coming off as really lazy.
sorry but its coming off as really lazy.
my bad i didnt think about it when i went to take tha fourwheeler apart i ws just tryin to get it apart
well usually when you take something apart, you want to put it back together.
unless your a little kid takin apart broken sh*t for fun lol.
unless your a little kid takin apart broken sh*t for fun lol.
well ima put it back together. jus tryin to see if anybody has the specs for the set so if u dont have them then dont worry about it.
