DIY oil injection block-off plate

[biggrobb762]

this is my block-off plate for the oil injection pump i got a peice of 1/4 aluminum plate and cut it out and drilled holes and used black RTV silicone gasket maker to seal it and it works just fine ive been running it and i dont have any leaks its amazing how you can save money by fabbing your own stuff

 

[toytech]

looks good nice fab work

 

[biggrobb762]

thanks i like to save money as much as i can

 

[Demo4o1]

i left my pump on with vacuum caps on the ends of the 2 lines an inch from the pump. i guess its equivalent to this mod

 

[slickerthanyou]

this is my block-off plate for the oil injection pump i got a peice of 1/4 aluminum plate and cut it out and drilled holes and used black RTV silicone gasket maker to seal it and it works just fine ive been running it and i dont have any leaks its amazing how you can save money by fabbing your own stuff

Very nice! always best to custom make your own stuff!

i left my pump on with vacuum caps on the ends of the 2 lines an inch from the pump. i guess its equivalent to this mod

No BLASTER that is not the same thing! He made his!

 

[slickerthanyou]

Ahh there ya go a green dot!

 

[Demo4o1]

no BLASTER man i meant to say the price to make that and buy the vacuum caps is prolly the same price bc he was looking to save $

 

[geewiz]

nice diy.looks clean and functional.

 

[recruiter101st]

Looks good! and way to save the 30 bucks for the kit.
Gotta love the satisfaction you did it yourself.