Clutch Problem NEED HELP

[TheWalkingPlague]

The Clutch rod looks like it is broke, i think that it welded itself to the ball, then broke off. i also cant find the ball (dont know if it is still in there or not). i ended up putting it back together the clutch engages properly, but when i put it into gear and disengauge the clutch the wheels dont move and the blaster shuts off. the wheels are very hard/wont move when the clutch is not engauge. did i just not put the clutch back on right or is the rod and the possibillity of not having a ball causeing this.

 

[stephen12091985]

to see if the ball is in there spray some parts cleaner in the hole and it should float out.did you line the dots up on the pressure plate and the basket?did you adjust it by the rod?theres a line on the top of the bottom end on the left side that the lever where the cable connects to its suppose to be lined up witht that line.hope this helps

 

[cwright#26]

Ah man I feel bad for you. Losing that ball is wooter

 

[244blackblastard]

losing the ball means your clutch won't disengage with the lever un till you put it in neutral to be able to push it. If in neutral gear and you can't push it then you have other problems.

 

[TheWalkingPlague]

i got bought the ball and rod and installed it today, but when i rev the moter up it makes a kkkkek sound coming from where the clutch area. do you think that clutch is bad or what thanks for the help to far guys

 

[lasxgames]

Sect 3-10 clutch setup http://www.rydindirty.com/blastermanual.pdf