christmas list! What do you think?

[motor mouth]

For chrstmas I'm going to ask for a Flotek port, vitos 3mm stroker crank,
34mm carb, adn power pros pipe. I know I get $300 spent on me and I cant get every thing. I can get deals on a pipe and carb, the carb I can get for $90 new, and the power pros pipe for $209 new or slitly use. I realy want to be able to kill a 400ex in a drag and top speed. that should shut up all the kids a school that say blasters are crap and are for little kids. any ways what do you guys think I should get. Also I what to know what the differance is between the $150 and $280 port job.

Thanks

 

[Blasterb0y794]

get a set of v-force 3 reeds and reed cage

 

[tjscott]

well i would recommend a bore instead.
2 strokes are meant to rev fast and high with a short stroke, and i know people stroke all the time (lol) but really, a stroked 2 stroke just doesnt rev right

 

[motor mouth]

bump bump

 

[BlasterChris08]

wtf does bump bump mean??

 

[blasterfreek30]

motor mouth, u will own that 400 with those mods, thats pretty much the same setup i have, and the 150$ port is for 93pump gas, the 280 i think is the drag port with race fuel

 

[Kennedy_Power]

If you want to drag race the pro pipe will work, if you’re going to trail ride go with Shearer pipe. The power pro spins 11,0000rpm and you will loose your front side of your curve; which is the most important for 98% of the blaster people.

 

[Kennedy_Power]

The power pro pipe with a 60mm crank at 11,000RPM would be 43307feet/minute
for the piston speed, good luck with that. Change out your piston often.

 

[hickskateboarder]

kids are so spoiled these days....

 

[motor mouth]

everyone stop posting coments that have nothing to do with what I asked.

 

[djack12]

i would do all of that, but its going to cost more than $300.00

 

[CC&Fabb]

I want a full engine build!