Checkin before i buy

[ChrisZx7]

About to order this, wanted to make sure its good enough for my build.

Honda TRX ATC 250R TRX250R ATC250R 34mm 34 PJ Keihin Carburetor Carb | eBay

Some type of exhaust (Havent decided yet)
Head mod
Bore
Port n polish
Vforce3 reed

 

[Triple_B]

Oh yeah that'll work geat.

 

[ChrisZx7]

Oh yeah that'll work geat.

No doubt, all i needed to know.

 

[89blaster89]

nice carb!!!!!!!!!!

 

[Triple_B]

No doubt, all i needed to know.

Make sure you get a larger intake boot I:I

Good luck man

 

[Awk08]

i run that exact carb, it was a biotch to jet, but you have me to fall back on now

you know you'll need a 34/35 intake too ?

might as call carb parts warehouse and order these jets.........

pilots 42,45,48,50
"dgh" needle (a must)
main jets 148,150,155,162

just call, it's much easier and the dude knows his chit !!!
Carburetor Parts Warehouse

 

[ChrisZx7]

i run that exact carb, it was a biotch to jet, but you have me to fall back on now

you know you'll need a 34/35 intake too ?

might as call carb parts warehouse and order these jets.........

pilots 42,45,48,50
"dgh" needle (a must)
main jets 148,150,155,162

just call, it's much easier and the dude knows his chit !!!
Carburetor Parts Warehouse

Will do, where do i order a intake from?

 

[ChrisZx7]

Nvm. Found one on ebay. f*ck there not cheap.

 

[Awk08]

intake.............

they aint cheap either, LOL

UPP Racing Intake Manifold Yamaha Blaster 34 35mm All Years | eBay

 

[ChrisZx7]

intake.............

they aint cheap either, LOL

UPP Racing Intake Manifold Yamaha Blaster 34 35mm All Years | eBay

Same one i was looking at.

What the hell happend to triple b!!!

No idea, was just here a min ago.

 

[Blasterr]

Why'd triple b get banned?

 

[Indread]

No idea why triple B got banned, :[

Back on topic:

Chriszx7- You can take your old reed cage boot and put it in boiling water for about 2 mins and it will slip right on the end of your 34mm carb, I just did the same thing with a 34mm Mikuni flat slide. I wasnt happy with a little bit of the boot blocking flow if I looked through the carb and into the boot there was like an 1/16th of an inch on 1 side where it looked the least bit restrictive so I took a dremel and cleaned it up. Looks like its going to work balls for me now, just need an aftermarket throttle cable and im set

 

[Blaaster]

I really am not in favour of cramming a 35mm carb into a stock 26mm boot, that is one hell of a stretch, and I can imagine bad things happening.

 

[Awk08]

I really am not in favour of cramming a 35mm carb into a stock 26mm boot, that is one hell of a stretch, and I can imagine bad things happening.

this has been done before, the owner luckily spotted a huge tear in it, i believe into the second season
if whoever attempts this starts a top end replacement fund now,
he may have enuf saved when, not if, that boot rips and costs him a top end.