Cedar lake Indiana ice races

[speed69phreak]

Can any tell me what would be the best tire screw set up for
A 1/8 mile flat track ?
I think I should go every lug in rear and off set left front
Pics would help
Thanks
Jimmy

 

[yzrider]

i'd ask 4cfed man, he is the ice master, theres another ice racer too, but i forgot his username

 

[hybridracer686]

It may be a little late answering to this thread but what the heck. If you plan on ice racing use cold cutter screws at least two per lug. You will also want to lower the machine if you don't have a lowering kit or sway bar then you can use ratchet straps to lower the suspension. Compress the suspension and crank down the straps until the shocks are fully compressed. this works fine in a pinch good luck..

 

[sheeblast]

Compress the suspension and crank down the straps until the shocks are fully compressed. this works fine in a pinch good luck..

ya until the shock blows.

 

[shawnsadler]

ya until the shock blows.

in flat track you don't put a huge load on the suspension. you won't blow a shock by using ratchet straps. i did it for many years. it works well until you can afford a good shorter suspension. as far as ice screws we use Kold Kutters on ChengShin tires. they have a ton of lugs and we run them in each lug. as far as fronts they usually take 2-4 screws per lug.