Carb Screw?

[Natdog10@yahoo.com]

which way do you turn the carb to make it run a little leaner. It is running a bit rich and all i need is it to run a bit leaner so how much should i turn the screw? Thanks.

 

[blasterfreek30]

the stock setting is about 2 to 21/2 turns out, is it close to that now?

 

[Natdog10@yahoo.com]

i think it is another 2 or 3 terns more.

 

[Natdog10@yahoo.com]

cause i just put on a full f7 pipe

 

[CC&Fabb]

dont worry about chaning that air/fuel screw on your carb if you install a pipe...Put it back at stock...1 1/2 -2 turns out and then jet up...That is the better way to go.