Ive finally adjusted my carb so it sits and ides good and the high end is perfect, but at about 1/4 throttle it breaks up and at about 1/2 it kicks back in and runs great. What do i need to do to get the gurgle out of my mid range???
carb problem!
- Thread starter joedirt5724
- Start date
Start by pulling the choke 1/2 out and see if it is worse or better. If it is worse then you're rich on your pilot and or needle. If it is better you are lean. To lean out the pilot turn the airscrew 1/8-1/4 at a time counterclockwise and the opposite to richen the pilot circuit. To lean out the needle move the needle clip one notch at a time toward the blunt end and toward the tip to richen. Hope that helps.
Wildcard
Wildcard
if you don't want to replace ur pilot then play with air/fuel and the clip on the needle, move it up a notch or 2
ive been messin with the airscrew and it only changes my low end. But it doesnt make any diff from what i can tell to my midrange. So im gunna try the needle setting, Thanks for the input.I:I
Similar threads
