carb and pipe system needed

[baseballertc14]

does anybody have a 35mm keihn carb for sale or a dyno port exhaust system for a 240cc motor

 

[flynhawaiian1]

does anybody have a 35mm keihn carb for sale or a dyno port exhaust system for a 240cc motor

I have a extra 36mm that was off a 240cc when I bought it. 100.00 shipped

 

[baseballertc14]

how much has it been used? and u got some pics?

 

[2kuik4u]

I got a paul turner if you want Not sold yet.

 

[flynhawaiian1]

how much has it been used? and u got some pics?

It's still in good condition. I never used it. I ended up not doing the extra 240cc So, this is extra. I bought it for 145.00. Go to this link for pics

A couple of things I have just collecting dust - Yamaha Blaster Forum

 

[baseballertc14]

would that work good on a 240cc motor?

 

[flynhawaiian1]

would that work good on a 240cc motor?

Well, I was told that it came off of one. Are you porting it?

 

[baseballertc14]

will eventually but not at this moment in time. jus wanna get it running.

 

[flynhawaiian1]

What type of 240 kit did you have?

 

[baseballertc14]

airsal from project blaster

 

[flynhawaiian1]

Well, you should asked them what they think. If they think their motor will work with it it's here. I don't want to tell you it will work with your build. But, I have seen some 240's out there with 36+ carbs on them. Like I said before the person I bought this from said it was on a 240 blaster. Now, how much was done to it I don't know.

 

[baseballertc14]

aight. I'll check in and see whats up

 

[flynhawaiian1]

I just did some measurements on the carb and it's a 35mm body and almost 36mm inside. So, you can tell them it's a Keihin PWK 35mm. number on carb is V564 G122. I guess I was fooled into buying a smaller carb then it really was advertised.