blaster wont start

sk8ball447

New Member
Jul 14, 2011
32
0
0
i have an 05 blaster and we just put new rings on and a new plug. it was running fine until it ran low on fuel. it would bog like the key way was stripped but the key is fine and i put more fuel in it and now it doesnt like to start. even when we pull it, it doesnt even want to start
 
i also swapped carbs, cdi, regulator, coil and plug from a running quad and some extra parts i have. it has spark and great compression
 
no i havent... it shouldnt be losing compression though

Leak down test has nothing to do with compression, you need to do one after a rebuild.



14mqc1y.jpg
 
Last edited by a moderator:
I was having this same problem did a leak test and all checked out turns out my float stuck shut and wasn't getting fuel to run took the bowl off clean and adjusted and second kick fired right up
 
the stator was messed up, the coils have tears in them. i swapped it with another stator i had in my shed and now it starts perfect. thanks for the advice guys