blaster wont start!!!

angels05ss

New Member
Apr 27, 2010
23
0
0
kingwood/houston tx
I used my blaster for a couple of hours yesterday with no running problems at all.next day I pulled the air filter off to clean it wich by the way is a dt racing filter.first I cleaned it with soap and water....left it to dry almost the whole day.next I had no oil to use on the filter so I used alittle bit of k & n oil filter spray.put it back on and fired up on the 1st kick,let it warm up then I went for a ride.5 minutes later it died on me doing a wot....after that no luck starting back up.any help will be appreciated.
 
I really dont think you supossed to clean the airfilter with soap and water...

They make a spray cleaner for them. I am not sure the K&N oil will work for a regular filet it might of sucked some of the oil into the carb. I would check the carb for oil residue and clean it then check the plug....

I would also recommend getting the airfilter cleaner and oil kit and reclean it....