blaster starts and then won't start after riding for a little while

[Jabes]

so i was riding my blaster the other day and it will kick over wen its cold but wen its warm it will only start if i bump it, and after i bump it, it will run fine just i usually have too bump it again after i turn it off, the compression is 95 on 3 kicks, cold, 115 after 6 kicks, cold, i'll get a pic of the plug tonite but i don't think its fouling plugs... anybody have any idea what could be causing this problem?

 

[fowlrock]

Time for a bore job...

95 is pretty low man. mine was running at 115 and I had a huge gash in my cylinder. Have you ever had your cylinder bored? If so, and its near its limit...I have a wiesco .80 over and a good stock cylinder...

good luck!

 

[Jabes]

i just rebuilt it the end of spring and probably don't even have 20 hours on it wtf... its bored .20 over i might just get my second jug bored and send it out for a p&p to flotek and then rebuild the top end damnit just wen me and my bro start riding alot

 

[fowlrock]

could be a bad gasket...getting some pressure loss...

I'd get a gasket kit on order and take the top end apart...but yeah, first assumption is gashes in the cylinder or damaged piston...

 

[blasterfreek30]

95 psi is low man, i had mine boerd not to long ago and i can already wiggle the piston in the cylinder, but it still runs like hell and starts first kick......well it did befor my swinger prob lol!

 

[igotacracker]

rebuild or leakage of somthing id say

 

[Jabes]

heres a pic of my plug kinda sh*tty cuz its from my phone...

i'm gonna order a gasket kit and then c what i find out when i pull the head