blaster runs crappy wont rev no power?? help!!

[blaster0187]

03 speacial edition typical blaster cleaned carb checkd reeds bone stock bike run won't really idle well kinda bogs when u hit the gas and sputters......sputters in n when just revving sounds like a lil miss or fuel spitter idk help guys

 

[acezeesawtooth]

fuel on? air filter clean? compression test performed? spark plug ok?

 

[blaster0187]

Got fuel compression could prolly be checkd but it backfires a lil bit and feels strong out the pipe

 

[blaster0187]

Prolly could check the plug but it rungs good sumtimes but mostly sh*tty

 

[acezeesawtooth]

what mods and jets you running?

 

[acezeesawtooth]

also tors still attached?

 

[79xs]

Check your parking brake switch. If the switch is messed up the atv will think the parking brake is on... that will cause the CDI to enable a rev limiter.

 

[blaster0187]

Tors is attatched with no swtich in the throttle I took the switch out and striat wired it across and it seemed better......tottaly stock motor even exhaust

 

[acezeesawtooth]

id try deleting the tors and see if it gets any better

 

[blaster0187]

I look at that there is no tors brain on this one just the black yellow wire str8 to the tors

 

[acezeesawtooth]

yeah its an 04 the tors is different. im not sure how to delete it... someone should know

 

[79xs]

BTW, the parking brake switch is attached to the block that holds the clutch lever

 

[blaster0187]

Cool ill try both of these and seeee wut I get!

 

[blaster0187]

I unplugged the e brake but I didn't help I'm gonna do more tors research

 

[UncagedShadow]

your sig shows an fmf fatty exhaust as does your pictures... Did you rejet for the exhaust?

 

[blaster0187]

This is a qaud I obtained for a friend 2 days ago.....the sig and pics posted are mine.....this quad had absolutely no mods at all none stocck pipe and all

 

[blaster0187]

My quads are fine......I jus recently got this one......it seems to be more sputtery when revving in n like a rich cond or sumthin?? Carb float needle all look great I cleand that and the reeds and cage still same thng when I get home plug will be checkd