BLASTER REV"S up WHEN I PULL CLUTCH IN

[raymond53]

01 blaster rev's up when i pull clutch in sometimes. it will rev high. no shure if its the tors or a bad seal? need help. and my exhuast header pipe leaks at the cylinder were it bolts up. i replaced ring and it still leaks. it has stock exhuast for now... please helpB)

 

[Blaaster]

A leaky exhaust can make for a too lean mixture causing it to rev.

 

[blasterdemon7]

I would first check for throttle sticking then check jetting.

 

[Larry's Shee]

XX-2 on these ^^^ Pull exhaust, clean both sides with anything other than gas. Put hi-temp RTV on it, install pipe. Allow 24 hours for it to "cure" before riding.

 

[Awk08]

leakdown test and clean carb

http://www.blasterforum.com/carburetor-138/how-clean-your-carb-pics-209/

http://www.blasterforum.com/do-yourself-20/build-use-leakdown-tester-10663/