Blaster parts Lots Pics included cheap

[JDMCRX]

Hey guys here are some parts I have Offers welcome. All parts will be going on ebay wed so PM me asap

Kehin 34mm carb with Trist throtle kit New $150

VITO's 3mm stroker crank with Brane new Bearings and spacker plate $150

Left Side Engine case, All new bearings and seals,Blance shaft with both bearings, case is deburded and ported and polished . $60

DT200 Trans complete. Shifts perfect in all gears, Comes with brand new main shaft bearing and counter shaft bearing. $80

Clutch Assembly basket and clutch and springs. $40

Shifter assembly and CLutch Assembly and rods $10

DT200 Reed cage and booster Can $20

Various parts, Kick starter gear and gears,drain plug, make offers.

Email me at jpbauto@yahoo.ca

Im posting it here and it will be going on EBAY wed. Needs to go

 

[rr97guy]

Hey guy I will be recieving my dt200 engine tomorrow, Do you know what carb was originalto the dt200? I may need a carb not sure what carb im getting.

 

[JDMCRX]

I Have a OEM DT200 carb here it is 26mm.

 

[rr97guy]

Do you think a standard blaster carb is the same except for the jetting?

 

[JDMCRX]

I did put a 34mm carb on my DT200 on my first motor and it did wake it up alot. 2nd gear i could roll on it and it would catwalk right away.

 

[JDMCRX]

I know the jetting is off big time . The blaster carb is a 24mm i think if im not mistaken. The DT200 motor loves to breath tho.

 

[rr97guy]

Im not sure what carb I should run. I will not know what carb im getting till I get motor from UPS tomorrow and seller did not tell me what size carb he had.

 

[rr97guy]

I am wondering if this is the dt200 engine you had for sale while back? the guy I bought it from was in Carbondale Illinois.

 

[flyers42091]

The blaster carb is 26mm. The same exact carb as the dt i believe.

 

[rr97guy]

I have a couple of stock blaster carbs laying around that need rebuilding as well as 2 of those 30mm flatslide carbs from Trenga racing that never worked because they leaked plus whatever carb I get with this engine

 

[flyers42091]

I just looked it up and the dt 200 is a 28mm stock carb. You may want to get something a little bigger, depending on what you want to do with it performance wise. A 30 would be good if you can get one to work.

 

[rr97guy]

We probably should move this to the chat feature or my posting in miscellaneous

 

[matt]

I sent you a pm about the DT200 intake and bottle.

 

[JDMCRX]

Pm sent back
Bump

 

[blastermaster14]

I need blaster engine mounts BAD!!!!!!!!!!!!!!!!! please let me know if u have any. I NEEEEED THEM!!!!!!!!!!

 

[JDMCRX]

Nope no mounts sorry

Bump

 

[yamaha4life]

do you still have the clutch? if so how much shipped to 25840 thanks dan

 

[scoobydid]

Do you have any shift forks? I'm in need of all three.

CHirs

 

[JDMCRX]

Trans is sold as complete

 

[mopar2284]

yes do you still have the clutch levers and the pass through rod ? if so howmuch shipped for them