Blaster on sparkplug eating frenzy????

[93_blaster_02]

Okay, pretty much every three or four starts I need to replace the spark plug. I have to ideas on what it might be, either gas ratio or pulg wire. If it is the gas ratio what do you think it should be? And anyone have any ideas?
Thanks Donnie

 

[suprex]

do you have the oil pump still in use?
if not, you should run at 32:1 (my opinion, and most others)

 

[93_blaster_02]

No i dont think so, I have it at 35:1 so i will try it. Thanks

 

[vspec]

if your running 35:1 it's leaner than 32:1 so it's not your ratio.

it sounds like your running too rich.

 

[hickskateboarder]

you don't think so.... do u put oil in the little jug under the seat? it would be too rich in oil if you premixed and it was still injecting..... what you have ur sparkplug gap at?

 

[crusty4365]

WAIT

is there a white container under ur seat?



if so u are running air thru the oil pump and premixing along with that!

 

[93_blaster_02]

no there is no white thingy under my seat it is just pre mixed. to 35:1

 

[93_blaster_02]

and i will check to what gapage it is at.

 

[bigdblaster]

u try adjusting carb????

 

[monoxide]

what should a plug be adjusted to? i have a stock bike just with a injector block off