Blaster idle problem.

[MCNorris]

Ok, when I first start my blaster it won't idle, if I don't feather the gas it dies, I turned the idle screw all the way up and it still dies, but after riding for about 20 minutes it was idling WAY too high so I turned it back down and it idles just fine, it's done this to me twice now, anybody tell me whats wrong?

 

[tyler1blaster]

could be your tors...correct me if im wrong someone!

 

[L.T.]

mmm you might have a very loose screw there idk, and tell me how many turns is your air screw?

 

[MCNorris]

about 4 1/2 turns out is where it idles fine after warming up.

 

[MCNorris]

Nobody? 1515151515

 

[yb200]

air screw 1.5 turns out adjust the idle on top of the tors when warmed up...mine wont idle till wamed up either....i have to feather mine for like a min or 2 then it idles

 

[MCNorris]

I have to feather mine for about 20 minutes, I was riding for about 20 minutes when it started idling high.

 

[foolish913]

if your air screw is 4 1/2 turns out my guess would be your jetting is off, if i remember right out on the air screw leans out the pilot jet, so your pilot would be too big but im not positive on that someone will corect me if im wrong though

 

[L.T.]

about 4 1/2 turns out is where it idles fine after warming up.

wow that is too much you should have it 1.5 or 2 turns out what is your jetting at (the size of your jets) and what position is your needle in. and what mods do you have on the bike

 

[ford88mustang]

How cold is it out side ? 2 Strokes are not the best in the cold.

 

[little3mil]

yea your main jet is too lean causing it to idle really high when it warms up. This happend to me when I took my air lid off and got a pipe, I re jetted it and its fine now. What mods do you have? What main jet are you running? And remove your TORS its really easy if you already havent, that can cause it to idle high too

 

[little3mil]

unless you have an airleak somewhere that will do this to check everything for air leaks...

 

[girton212]

same exact thing happend to me except no it wont idel at all.. i have to feather the gas to keep it running.. even when ive been ridin it for a while and its hot. i have no idea whats wrong with it. the idle screw is about 1.5 out and so is the air screw. could it be the plug or dirty carb?